If you want more uptime, lower overall operating costs, greater resale value, and a longer life for your skid steer, preventive maintenance (PM) is key. Experts from CONEXPO-CON/AGG staples Caterpillar, CASE, and Wacker Neuson have all the PM maintenance tips you need for skid steers.
1. MAKE IT A HABIT TO CHECK THESE THINGS EVERY DAY
Operators should start each workday with a daily walk-around inspection in which they:
- Check fluid levels (hydraulic fluid, fuel, coolant, engine oil) to make sure they are in the operating range specified in the owner’s manual.
- “Fluid levels can have a significant effect on the machine’s performance and can lead to overheating a particular system, loss of machine performance, or even downtime,” says Kevin Coleman, senior product specialist at Caterpillar.
- Check the filters (engine air filters as well as cab filters).
- “Owners who are diligent about following filter maintenance intervals are the ones who will see the least amount of downtime,” says Fred Paul, Wacker Neuson University manager. “By utilizing high-quality fuel, oils, and OEM filters, the owner is in a position to maximize uptime and productivity.”
- Inspect for leaks and look for fluids gathering anywhere inside the engine compartment, but also look for fluids in other places.
- “Whether on the ground, in the engine compartment, or on the machine itself, pooled fluid tells a story that should be investigated,” says George MacIntyre, product manager for CASE Skid Steers and CTLs. “Identifying the source will help you identify possible damage or repairs that can be made before they become more costly downtime events.”
- Check tires for wear or damage and for proper inflation.
Tire inspection is key for skid steer loaders. “Flat or underinflated tires can affect the machine’s safety and performance in addition to leading to downtime,” says Coleman. “If you have a low tire when you lift a load off the ground it can make the machine very unstable,” adds Paul.
2. DON’T SKIMP WHEN IT COMES TO FLUID SAMPLING
According to MacIntrye, fluid sampling is an often-overlooked practice that can tell you a lot about the health and performance of your machine. CASE recommends engine oil samples be sent for analysis every 250 hours, hydraulic and transmission fluid every 250-500 hours, and coolant be tested annually.
Owner’s manuals will include the recommended intervals for your machine.
MacIntyre believes fluid sampling is especially important if a machine has had previous owners or has been used across numerous jobsites. “It’s often those unseen issues that can create the most unexpected downtime events,” he says.
When maintenance records provide a history of fluid sampling, it can be valuable when trading in your machine. “Fluid sampling may also allow for extended oil drain intervals for certain fluids, thereby reducing owning and operating costs,” says Coleman.
3. TAP INTO TELEMATICS
Without dedicated fleet managers, many small and mid-sized firms that own skid steers can find it challenging to schedule routine maintenance.
Basic telematics programs provide hour readings and location data that can help these businesses stay ahead of maintenance intervals. More comprehensive telematic solutions provide additional functionality for machine monitoring, health, and maintenance. “If a machine is equipped with the deluxe telematics version, and the machine alerts the operator with a problem, that same alert will be visible to the owner or mechanic at the same time,” says Paul. “This provides valuable diagnostic assistance early and can help the mechanic determine a course of action. Often this can save time and money on repair or maintenance costs and keep the machine operating at top performance.”
While the number of skid steer owners opting for telematics is relatively low in comparison with larger machines, MacIntyre sees an upward trend as equipment owners realize the advantages.
4. GET OPERATORS ON BOARD WITH MAINTENANCE RESPONSIBILITIES
Operators are the first line of defense when it comes to taking action on maintenance items. In addition to daily inspections, operators need to understand how to respond to in-cab alerts and messages. Most skid steers include a machine vehicle control unit (MVCU) that provides real-time indicators of machine conditions. The codes could indicate something major, or as simple as low DEF (diesel exhaust fluid). If addressed promptly small problems can often prevent larger problems.
5. CONSIDER OPTIONS THAT REDUCE THE BURDEN OF MAINTENANCE
Manufacturers and dealers are making it more convenient than ever for fleet owners to maintain equipment. A Cat Customer Value Agreement ensures that parts are delivered on time with instructions for maintenance. “Owners get the security of an Equipment Protection Plan (EPP) to avoid unexpected costs for unplanned repairs,” says Coleman. “All the keys to machine health management conveniently display on your phone. And it all can be rolled in with their monthly machine payment.”
Wacker Neuson Service kits can be ordered prior to a scheduled PM so parts are on hand when the service is performed, reducing any downtime associated with the maintenance. Cat Self-Service Options offer a broad range of common repair options, packaged with everything a customer needs to do the work himself—in their shop or in the field.
CLOSING THOUGHT
Held every three years, CONEXPO-CON/AGG is the must-attend event for construction industry professionals. The show features the latest equipment, products, services, and technologies for the construction industry, as well as industry-leading education. The next CONEXPO-CON/AGG will be held March 14-18, 2023, in Las Vegas.
For More Information:
For more information on CONEXPO-CON/AGG, visit www.conexpoconagg.com.
Modern Contractor Solutions, June 2022
Did you enjoy this article?
Subscribe to the FREE Digital Edition of Modern Contractor Solutions magazine.
