By Maury Bagwell

From parking lots to roadways, asphalt serves a critical role in infrastructure. But it must contend with some of Mother Nature’s harshest treatment. Sealcoating may be asphalt’s best ally for longevity. Here are a few quick tips for successful and profitable jobs.


Before any contractor takes on sealcoating, they need to understand why it’s important and how it works to protect asphalt.

Water and ultraviolet rays are asphalt’s two worst enemies. They degrade the surface, causing small cracks and voids that make way for water to damage the underlying base materials. If not protected, material failure is imminent and will rear its ugly head in the form of potholes. 

The only way to prolong asphalt life and keep this from happening is with proper and regular sealcoating. Sealcoat material fills the voids in asphalt and creates a protective barrier from water and sunlight. It can even extend asphalt’s life by as much as four times—but, it must be done right and at the right times.


Starting with the proper mix is critical to producing quality results. Using “black water,” as watered-down mix is commonly referred to, will never render results that last, and it will quickly give a contractor a bad reputation. 

Ensure the mix includes at least 3 pounds of sand per gallon of water to provide the right grip needed for safe use by both vehicle and foot traffic. It’s also important to use quality materials and be sure the mix is adequately blended. Always follow the material manufacturer’s mix-to-water ratio recommendation. 


Proper sealcoating conditions are similar to those needed to paint a house. The temperature needs to be at least 50 degrees Fahrenheit and rising, and there should be plenty of bright sunlight. It is not recommended to sealcoat when it’s colder than 50 degrees or during overcast at this temperature. 

Also, consider how long the area will need to dry and how long the space can be closed to traffic. If your client demands a small window to sealcoat and stripe, you’ll need to be sure you’re not applying material on a cool, cloudy day. Heat and sunlight are your best allies for speeding up drying times. 


Before any drop of sealcoat makes contact with the surface, it’s imperative to prepare the asphalt; that means dry and clean. Clean off stuck mud with a wire bristle brush and use a high-powered blower to remove debris and water. A sealcoating machine that features a high-powered blower can really speed up prep time. The blower is mounted right on the machine and offers three times the output of walk-behind blowers, so contractors can clean areas faster and more thoroughly. To speed prep work even further, a baffle attachment automatically cuts in sealcoat materials on the go. When contractors use a high-powered blower and baffle attachment together, they can work as much as seven times faster and with fewer people, enhancing productivity while minimizing costs. 


While prep work, the mix, and knowing the right time to sealcoat is pretty straightforward, knowing how often to sealcoat is a little more fluid. The weather, precipitation, freeze/thaw cycles, and traffic can all have an impact and will vary from year to year. Sealcoating typically needs to be done every 2 to 5 years, but it’s a good idea to be proactive with clients. If conditions were particularly harsh, check in with clients and go out and inspect the area to see if services are needed sooner.


Whether operators are novice or veteran, when sealcoating basics are kept top-of-mind they help seal the deal for a successful job. 

About the author:

Maury Bagwell is the lead engineer at Neal Manufacturing, a division of Blastcrete Equipment LLC, which is based in Anniston, Alabama. He has more than 25 years of experience in manufacturing, sales, product design, and engineering. His primary responsibilities include product development, engineering, and quality control. For more, visit

Modern Contractor Solutions, March 2020
Did you enjoy this article?
Subscribe to the FREE Digital Edition of Modern Contractor Solutions magazine.