VENCO VENTURO
VENTURO HT60KX
Big jobs in challenging industries need strong, safe heavy-duty equipment you can depend on. From construction to municipalities and truck repair, the Venturo HT60KX is a made-in-the-USA heavy-duty service crane that is purpose-built to handle your work demands. Rated at 60,000 ft lbs with a hefty 10,000-lb lifting capacity and 25 and 30-ft reach options, the HT60KX delivers the brute power you need to tackle any job, anywhere. The operator-friendly design and safety-redundant features of the VLC™ remote control system help make the HT60KX the long-lasting, durable crane jobsites demand. For more, visit www.venturo.com.
LINEWISE
TLL-300 Triple Line Lifter
The new TLL-300 Triple Line Lifter is designed to support up to three phases during distribution work below 34.5 kV. With models available for bucket trucks, cranes and digger derricks, the economical TLL-300 significantly increases efficiency on pole change-outs and other maintenance tasks. The TLL-300 features a fiberglass mast and crossarm with three adjustable wire holders. The wire holders can be moved along the crossarm in 3-inch increments without the use of tools. For added versatility, the crossarm can rotate 15 degrees each direction, both inline and perpendicular to the boom. For more, visit www.line-wise.com.
INDCO
Gear Drive Mixers
INDCO presents its BGTC-series gear drive IBC bracket mount mixers designed specifically to mix heavy viscosity materials or re-suspension of settled materials, including traffic paint formulations. BGCT series gear drive mixers are available with air, electric, and variable speed electric operation, from ¾ to 2 hp, to provide various levels of torque. Units include shaft, folding impellers to easily fit through 6-inch tote openings, and expandable mounting bracket. INDCO BGCT-series mixers are ideal for traffic paints and other heavier bodied primers, and other coatings, including those high solids content, and reflective glass beads. For more, visit www.indco.com.
ATLAS COPCO
B-Air 185-12
Atlas Copco expands its portable electric product portfolio to include an all-new battery driven portable screw air compressor. The B-Air 185-12 features 5-12 bar of pressure, a stable flow rate of 5.4-3.7 m3/min and 55-kWh battery storage capacity. With power delivered from its onboard power pack, in operation a fully charged unit is independent of the need for fuel or a local power source to plug into, and has the capability to perform for up to a full typical work shift. The B-Air 185-12 is scheduled to go into production in September. For more, visit www.atlascopco.com.
CATERPILLAR
RM600 Reclaimer/Stabilizer
The new Cat RM600 reclaimer/stabilizer offers power, performance, and productivity to efficiently complete full-depth reclamation and soil stabilization projects. The turbocharged Cat C18 engine gives the RM600 up to 17% more power than the RM500B. Featuring a belt driven rotor drive system, the machine is capable of flush-cutting on the right side. The new System K rotor uses the same cold planer fastener-free, dual-taper toolholder and base block components to deliver superior material quality. Exit and return-to-cut features simplify operation, save time, and ensure a consistent depth of cut. For more, contact a Cat dealer or visit www.cat.com.
RICHWAY INDUSTRIES, LTD.
Sub-Compact Articulating Loader
Richway Industries, Ltd. introduces its rear steer SCL-210 sub-compact articulating loader. The SCL-210 is rugged, versatile, and turf friendly. The small footprint provides easy access to confined areas. Equipped with a 24.8 hp Kubota diesel engine, manual locking “mini-skid” universal quick-tach, traction control, 2-inch receiver hitch, heavy duty all steel body, suspension seat, greaseless bushings allow for low maintenance hinge points, pilot control joystick, and 12 gpm/2500 psi auxiliary valve and innovative hydraulic oil reservoir requiring only 2 gallons of fluid. 2 year/1000 hour warranty, whichever occurs first. Dealership opportunities available. For more, visit www.richway.com.