Genie introduces its GTH-1056 telehandler. Extensively field-tested to validate performance, the GTH-1056 has been purposefully designed to lower total cost of ownership by 10% while delivering 20% more lift capacity at max height in a machine with a 30% stronger design. The GTH-1056 builds on popular features, including a side-mounted engine and stronger boom design, to deliver a rugged, reliable telescopic handler with a 10,000 lb capacity. Able to lift 5,000 lbs at max height of 56 ft, 7 in., and 3,000 lbs at max reach of 42 ft, the GTH-1056 boasts a 30% stronger boom and chassis. For more, visit www.genielift.com.
Vocational Model 567
Peterbilt Motors Company launches the vocational Model 567 truck. Exterior updates to the Model 567 include a cab-mounted side mirror, bright air intake bezel option, and increased DEF tank volume. On the inside, the Model 567 features the 15-inch Digital Display. A fully customizable user interface (UI), delivers easy-to read information and full PTO integration. Operators can fine-tune the Digital Display information to suit their individual preferences through the easy-to-use controls found on the all-new smart steering wheel. Fully customizable B and C-panels accommodate a wide variety of vocational needs. The Model 567 is available with the latest safety systems fully integrated into the Digital Display. Key technologies include lane keeping assist, adaptive cruise control with auto resume, speed sign recognition, side objection detection, safety direct integration, multi-lane emergency braking, and highway departure detection. The Model 567, combined with the new 2021 PACCAR MX-13 and MX-11 engines and PACCAR transmission, sees a 2% improvement in fuel efficiency and delivers increased reliability and uptime. For more, visit www.peterbilt.com.
Ion Dust Shield
BOMAG created a unique, patented design to not only transfer dust away from the operator(s), but also eliminate fine particles (PM 2.5, PM 10) by up to 80%. The ION Dust Shield positively charges the fine dust particles, creating permanently bonded coarse dust. During milling, water is applied directly to the milling drum where fine dust particles pass by the water at high velocity or are too small to be captured by water droplets. A suction fan pulls these particles into the lower conveyor and further into the electrically charged grid of the ION Dust Shield. For more, visit www.bomag.com.