Designed with the contractor in mind and manufactured with American steel, the Dual Dozer can push or pull material and grade in any direction. The dual-sided cutting edge fills in low spots faster. Get closer to edges with rear-mounted casters. The Dual Dozer works with even the highest level of all industry-leading machine controls and can be ordered with a standard quick-tach plate, three-point mount, or both to maximize your mounting options. HitchDoc has been manufacturing the Dual Dozer for more than 20 years and sells through a trusted dealer network. Dealer opportunities are available.
For more, visit www.hitchdoc.com/dual-dozer.php.
Ditch Witch introduces the MT26 microtrencher. The attachment is part of a complete microtrenching system, along with the Ditch Witch RT80 ride-on trencher and HX75 vacuum excavator. With the MT26, operators can create a clean, deep, narrow trench in one easy pass, with minimal disruption to the surrounding infrastructure. The MT26 can cut a clean trench from 1.5 inches up to 3 inches wide and down to 26 inches deep. Reaching depths of up to 26 inches allows contractors to install a typical 2-inch fiber or power cable line with the required 2-feet of ground cover all at the same time.
For more, visit www.ditchwitch.com.
Battle Ax™ Mulching Heads
Loftness expands its line of Battle Ax™ horizontal drum mulchers with the new L Series, designed for low-flow skid steers with 16- to 30-gallon-per-minute hydraulic flow ratings. The new models allow the high-performance Battle Ax to be used on a wider variety of power equipment, since previous models were only available for high-flow skid steers. L Series Battle Axes are available with 51- and 61-inch cutting widths, features a new rotor design with built-in depth gauges, and reversible Quadco blades. The mulchers also include an exclusive two-stage cutting chamber.
For more, visit www.loftness.com.
XXL Straddle Loader
InnoLIFT USA introduces the XXL Straddle Loader. This innovative loader lifts its load and itself into and out of virtually any delivery vehicle, including Mercedes Sprinter, Ford Transit, and Ram ProMaster cargo vans, box trucks, and semi- trailers. The XXL Straddle Loader allows operators to easily and safely load and unload open and closed bottom pallets weighing to 1100 lbs, with other InnoLIFT models available for heavier weights. Both manual push and electric-powered walk-behind models are available, all featuring hydraulic lift. All units can be charged en-route in delivery vehicle or in host facility.
For more, visit www.innoliftusa.com.