Modern Construction Products – September 2013

DANUSER
Wobble Auger
Danuser’s Wobble Auber produces a hole with no loose dirt in the bottom or around the top of the hole, so no labor is required to remove dirt. The hole is compacted and ready for concrete. The auger pushes through dirt, sand, clay, asphalt, and compacted or embedded rock. It can be used as a pilot auger for post drivers. The Wobble Auber is available in 4 in, 6 in, and 9 in diameters with standard 4 ft length. Various collar options are available. Dig more holes with less work. If you have any questions, contact Glenn Danuser at 573.642.2246, ext. 204, or email sales@danuser.com. For more information, visit www.danuser.com.

BLASTCRETE EQUIPMENT COMPANY 
Mason Mate
The Mason Mate is an innovative machine designed primarily for high-rise block fill applications, as well as concrete repair and underground shotcrete for mining and tunneling applications. The unit features Blastcrete’s D3522 hydraulic squeeze pump, a high-shear continuous mixer, and an optional 1,000 lb capacity bag lifter. Rather than mixing material and water offsite, then transporting the blended material with expensive telehandlers to be installed, the Mason Mate is able to perform the entire process from start to finish right on the jobsite, and requires just one operator. It easily fits in the back of a pickup truck or in a freight elevator, and can operate within an 8-ft ceiling. A 29 hp Kubota water-cooled diesel is standard, and is available with either a 35 hp Briggs & Stratton gasoline engine or 30 hp electric motor with starter and disconnect. For more information, visit  www.blastcrete.com.

FJM SECURITY PRODUCTS  
Combination Padlocks
FJM Security Products announces the new addition to its family of FJM Security Combination Padlock Series, now available in an ergonomic shape with short, long, shrouded, and shrouded-long shackle versions. FJM Security’s heavy-duty, all-weather combination padlocks mean no longer turning the locks upside-down and squinting at small numbers. The FJM Combination Padlock shackles have no spring loaded components that will corrode or wear out over time and do not need a mandatory reset key or pin that can become lost. To open the shackle, simply set the dials to the correct combination with no additional pulling, pushing, or slamming required. For more information, visit  www.fjmsecurity.com.

CROSS-TECH MFG.
Demolition Grapple Bucket
Cross-Tech Mfg., located in Crosslake, Minnesota, is a nationwide leader in the manufacturing of hydraulic rotary brush cutters under the name Brush Wolf, a quality driven product that is known for its industry leading high standards in construction, reliability, and safety. Brush Wolf rotary brush cutters are designed to fit all skid-steers, mini-skids, and excavators, with a maximum cutting capacity of 8 in to 10 in and over 25 models to choose from. Cross-Tech Mfg. proudly introduces its new Demolition Grapple Bucket built with the same high-quality production standards found in Brush Wolf brush cutters. The DG series of Demolition Grapples is perfect for disaster cleanup or at your construction site and for farm and ranch use. For more information, call 877.390.9857, or visit www.brushwolf.com.

HUSQVARNA
Drill Motor
Husqvarna added a new model to its popular DM 340 drill motor, a 115V version. The new model gives customers another powerful drilling option. The 115V model can supply enough power and torque to drill through heavily reinforced material for increased production rates. A water-cooled, three-speed gearbox makes it easy to set the optimum drilling speed for drill bits with diameters from 2 in to 16 in. The DM 340 115V is perfect for heavy-duty core drilling applications where high production rates are needed, especially with large diameter core bits. It can be used for a variety of applications including water/waste evacuation pipes, channels for ventilation and plumbing, gas supply pipes, barriers, road signs, and holes in corners for wall saw openings. For more information, visit  www.husqvarnacp.com.

BARTELL MORRISON
Lighting Tower
Bartell Morrison introduces its customer response for “Green Equipment” and introduces the award-winning VB9 Lighting Tower. The new tower is designed for all of a contractor’s lighting needs and features savings benefits, such as 72 percent reduction in fuel costs, 435 percent increase in running time at 320 hours, and light coverage of 38,750 sq ft at 1.85fc. Its maximum height is 27 ft and is certified to 70 mph wind speed. Other features include a central lifting eye, fork-lift pockets, and a 7.5 hp diesel engine c/w electric start. For more information, visit www.bartellmorrison.com.
_________________________________________________________________________
Modern Contractor Solutions, September 2013
Did you enjoy this article?
Subscribe to the FREE Digital Edition of Modern Contractor Solutions magazine.